Orbital Shaker Attachment Accessory for the Roto-Shake Genie
EMS Catalog #71834-67
Instructions
Remove magnetic platform from the Roto-Shake Genie (see Roto-Shake Genie manual).
Place 3-D Orbital Shaker Attachment on the Roto-Shake Genie base, aligning the hex shaft with the hex on the pulley of the 3-D Orbital Shaker Attachment. Make sure the two feet are in contact with the Roto-Shake Genie base.
Use the Roto-Shake Genie speed control knob for controlling the speed of your 3-D Orbital Shaker Attachment. Speed range is 10-70RPM.
Place Non-Skid Mat on the 3-D Orbital Shaker platform. Do not use attachment without Non-Skid Mat.
Place all loads centered on 3-D Orbital Shaker platform. Please note, platform capacity is 1 Kg (2.2 lb).